Dla firm: zapłać tylko 30% z CITB Employer Network Funding
Zapytaj terazNadzór nad pracami budowlanymi w Wellingborough może wyglądać zupełnie inaczej w zależności od projektu. W jednym tygodniu możesz koordynować prace ziemne i ruch pojazdów na terenie dużej inwestycji mieszkaniowej. W następnym możesz pracować w pobliżu zamieszkałego budynku, przy renowacji centrum miasta lub w mniejszym zespole wykonawczym, gdzie jeden kierownik musi jednocześnie nadzorować kilka działań. Program szkoleniowy z zakresu bezpieczeństwa nadzoru budowlanego zapewnia kierownikom uporządkowany sposób radzenia sobie z takimi sytuacjami, nie doprowadzając do eskalacji każdego problemu do poziomu kryzysu.
Wellingborough różni się również od wielu innych miejsc, które uwzględniamy w naszej ofercie, ponieważ właśnie tutaj znajduje się główna siedziba firmy Construction and Plant Training Services. CPTS LTD prowadzi działalność przy Airfield Road w Wellingborough, NN29 7XA. Dla lokalnych uczestników oznacza to, że kurs SSSTS to coś więcej niż tylko szkolenie reklamowane w pobliskim mieście. Jest to szkolenie dostępne w okolicy, w której wielu naszych kursantów już mieszka, pracuje i przemieszcza się między placami budowy.
Najważniejsze nie jest to, czy uda ci się zdać egzamin SSSTS. Bardziej przydatne pytanie brzmi: czy potrafisz wykorzystać zdobytą wiedzę w sytuacji, gdy zmieniają się warunki dostępu, niespodziewanie pojawia się podwykonawca, pracownik nie rozumie zasad RAMS lub realizacja zadania zaczyna odbiegać od uzgodnionej metody.
Szukam kolejnego kursu SSSTS w Wellingborough. Sprawdź aktualną dostępność kursów lub skontaktuj się z zespołem szkoleniowym przed wyjazdem.
Wellingborough przechodzi obecnie okres znacznego, długoterminowego rozwoju. Ma to znaczenie dla nadzoru budowlanego, ponieważ większe obszary inwestycji powodują powtarzające się punkty styku między ludźmi, sprzętem, tymczasowymi drogami dojazdowymi, sieciami użytkowymi, pracami ziemnymi, dostawami oraz różnymi wykonawcami działającymi zgodnie z odmiennymi harmonogramami.
Na wschód od miasta znajduje się Stanton Cross – duża inwestycja o charakterze mieszanym. Rada Hrabstwa North Northamptonshire opisuje ten projekt jako obejmujący 3 750 mieszkań, zabudowę przemysłową i handlową, połączenia komunikacji publicznej oraz węzeł przesiadkowy przy stacji kolejowej, park miejski, trasy spacerowe i rowerowe, obiekty społeczne, szkołę podstawową, drogi dojazdowe oraz infrastrukturę mostową.
Na północy znajduje się Glenvale Park – kolejna duża inwestycja urbanistyczna. Według danych rady miejskiej obejmuje ona około 3 265 domów, a także tereny przeznaczone pod działalność gospodarczą, w tym biura, przemysł lekki, przemysł i magazyny, a także lokalne centrum usługowe oraz powiązaną infrastrukturę.
Również centrum miasta ulega zmianom. W 2026 roku Rada Hrabstwa Północnego Northamptonshire opracowała i poddała konsultacjom nowy plan zagospodarowania przestrzennego centrum miasta Wellingborough, który ma wytyczać kierunki rewitalizacji i inwestycji w nadchodzącej dekadzie i w dalszej przyszłości. Propozycje uwzględniają ważne obiekty, przestrzenie publiczne oraz sposób poruszania się mieszkańców po centrum miasta. Oddzielne propozycje rady obejmowały również prace renowacyjne budynków, takich jak Swanspool House, Croyland Hall i Croyland Abbey.
Żaden z tych projektów nie jest związany ze szkoleniem CPTS, ale razem pokazują one, z jakimi warunkami budowlanymi mogą mieć do czynienia lokalni kierownicy robót. Duże inwestycje mieszkaniowe, prace w centrach miast, istniejące budynki, tereny przemysłowe i budownictwo inżynieryjne nie wiążą się z identycznymi zagrożeniami. Wymagają one jednak takiego samego podejścia do nadzoru. Należy obserwować bieżącą sytuację, porównać ją z zaplanowanymi środkami kontroli i podjąć działania, gdy te dwa elementy przestaną się ze sobą zgadzać.
CITB podkreśla, że kurs SSSTS jest przeznaczony dla osób, które obecnie pełnią funkcję kierowniczą lub przygotowują się do jej objęcia. Nie musisz mieć imponującego stanowiska. Liczy się zakres Twojej odpowiedzialności.
Zadaj sobie proste pytanie. Czy inni pracownicy kierują się twoimi instrukcjami przed rozpoczęciem pracy i czy musisz interweniować, gdy wykonanie zadania staje się niebezpieczne? Jeśli odpowiedź brzmi „tak”, to obowiązki objęte programem SSSTS są już bliskie twojej codziennej pracy.
Obecny załącznik C do regulaminu programu CITB, wersja 01.01 z września 2026 r., określa formalną strukturę kursu. Kurs SSSTS trwa dwa dni, a uczestnicy muszą być obecni przez całe 15 godzin, nie licząc przerw, aby uzyskać uprawnienia do certyfikacji.
Kurs może być prowadzony w sali szkoleniowej lub zdalnie przez Internet. CITB określa również limity liczby uczestników. W kursie stacjonarnym może brać udział maksymalnie 20 osób, natomiast w kursie zdalnym – maksymalnie 12. Limity te mają znaczenie, ponieważ program SSSTS opiera się na dyskusjach, ćwiczeniach, aktywnym udziale i komunikacji, a nie na biernym słuchaniu.
Pomyślne ukończenie wymaga spełnienia trzech warunków. Należy wykonać obowiązkowe ćwiczenia, zdać ocenę prowadzącego oraz zdać egzamin końcowy.
CITB organizuje obecnie szkolenia SSSTS w oparciu o sześć modułów. Zamiast traktować je jako sześć zagadnień do zapamiętania, warto raczej zastanowić się, jak każdy z nich wpływa na Twoje codzienne decyzje.
W niniejszym rozdziale określono miejsce kierownika w strukturze zarządzania placem budowy. Kierownik często znajduje się na tyle blisko miejsca pracy, że dostrzega niebezpieczne zachowania lub zmieniające się warunki wcześniej niż kierownictwo wyższego szczebla. Wiąże się to z odpowiedzialnością, ale wyznacza też granice. Należy wiedzieć, nad czym można samodzielnie sprawować kontrolę, a co należy zgłaszać wyżej.
Kurs SSSTS obejmuje cele przepisów dotyczących bezpieczeństwa i higieny pracy, rozporządzenie z 2015 r. w sprawie projektowania i zarządzania budową, ocenę ryzyka, opisy metod pracy, zezwolenia na wykonanie prac, kontrole ustawowe, monitorowanie oraz zgłaszanie zdarzeń.
Wniosek praktyczny jest prosty. Procedury RAMS nie mają wartości same w sobie. Stają się wartościowe wtedy, gdy zaplanowana metoda odpowiada rzeczywistemu zadaniu, a pracownicy rozumieją środki kontroli. Kierownik powinien zauważyć, kiedy dostęp, sprzęt, personel lub kolejność czynności uległy zmianie na tyle, że pierwotna metoda staje się wątpliwa.
Niektóre zagrożenia związane z budownictwem powodują natychmiastowe obrażenia u ludzi. Inne powodują szkody stopniowo. W związku z tym system SSSTS obejmuje substancje niebezpieczne, azbest, pył i opary, hałas, wibracje, ręczne przenoszenie ciężarów, pierwszą pomoc oraz rozwiązania w zakresie opieki socjalnej.
Miejsce pracy może wyglądać na uporządkowane, a mimo to narażać pracowników na poważne zagrożenia dla zdrowia. Kierownik powinien zwracać uwagę na sytuacje, w których nie stosuje się systemów odciągowych, środki ochrony dróg oddechowych są nieodpowiednie, ignoruje się narażenie na wibracje lub gdy metoda ręcznego przenoszenia ładunków jest ewidentnie nierealistyczna dla osób wykonujących dane zadanie.
Kurs obejmuje zagadnienia związane z organizacją placu budowy i bezpieczeństwem, ochroną przeciwpożarową, instalacjami elektrycznymi, sprzętem mobilnym, pojazdami oraz bezpieczną obsługą maszyn i urządzeń. Tematy te mają szczególne znaczenie w obszarach rozbudowy, takich jak Stanton Cross i Glenvale Park, gdzie układ placu budowy, trasy transportu i organizacja dojazdów mogą ulegać zmianom w miarę postępu poszczególnych etapów prac.
CITB obejmuje prace na wysokości, wykopy, instalacje podziemne i napowietrzne, przestrzenie zamknięte oraz prace tymczasowe. Kurs SSSTS nie czyni z kierownika specjalisty ds. projektowania, koordynatora prac tymczasowych ani planisty operacji podnoszenia. Powinien on pomóc w rozpoznawaniu zagrożeń, zrozumieniu potrzeby stosowania odpowiednich środków kontroli oraz w ustaleniu, kiedy konieczne jest zaangażowanie specjalisty.
Kierownik odpowiada również za kwestie związane z ochroną środowiska. Codzienny nadzór może obejmować takie zagadnienia, jak odpady, zapobieganie wyciekom, pył, hałas, przechowywanie materiałów oraz wpływ prac na sąsiednie obszary. Ma to szczególne znaczenie w przypadku, gdy prace budowlane prowadzone są w pobliżu istniejących budynków mieszkalnych, dróg, obiektów handlowych lub dróg publicznych.
Najlepszy kierownik to niekoniecznie osoba, która najgłośniej się wypowiada na placu budowy. Wytyczne BHP kładą duży nacisk na przywództwo, komunikację i zarządzanie ludźmi. Kierownik musi wydawać jasne polecenia, słuchać pracowników zgłaszających obawy oraz zwracać uwagę na niebezpieczne praktyki, nie zamieniając przy tym każdej rozmowy w kłótnię.
Kierujesz już zespołem w okolicach Wellingborough, ale nie masz pewności, czy certyfikat SSSTS odpowiada Twojej roli. Skontaktuj się z CPTS i opisz, czym faktycznie zarządzasz na miejscu.
Jednym z najprostszych sposobów, by sprawić, by trening przyniósł korzyści, jest wypracowanie rutyny, którą można powtarzać. Poniższe podejście ma charakter celowo praktyczny.
1. Należy dokładnie zrozumieć, co jest budowane, montowane, przenoszone lub demontowane.
2. Sprawdź, czy aktualne plany RAMS odzwierciedlają lokalizację, wyposażenie, personel oraz kolejność działań, które zamierzasz zastosować.
3. Look at pedestrian routes, plant movements, deliveries, nearby trades and public interfaces.
4. Confirm that permits, inspections and specialist controls are in place where they are required.
5. Identify workers who may need closer supervision because they are new, inexperienced or unfamiliar with the task.
6. Brief the team in plain language and give people a genuine opportunity to ask questions.
1. Watch the activity rather than assuming the signed paperwork means the method is being followed.
2. Notice changes in access, weather, equipment, storage, sequencing or neighbouring activities.
3. Check that the controls remain practical and are being used correctly.
4. Intervene when unsafe practice appears and explain what needs to change.
5. Escalate anything that sits outside your authority, appointment or technical competence.
1. Check housekeeping, access and the condition of the work area.
2. Confirm that excavations, barriers, temporary structures and equipment are left in a safe state.
3. Report defects and unresolved issues.
4. Pass relevant information to the next shift, supervisor or manager.
5. Complete records required by the site system while the information is still fresh.
An interface is the point where one activity, team or system affects another. They are common on every site, but they multiply as projects grow.
A delivery driver and a groundworks gang share an access route. A scaffold affects another trade below. A temporary excavation changes a pedestrian path. A housing phase opens while work continues nearby. A town centre refurbishment takes place around members of the public. None of these situations can be managed well by looking at one task in isolation.
A supervisor should keep asking one question. What has my work changed for somebody else. That question is particularly useful around mixed use developments and occupied areas because safe work can still create an unsafe interface if another team has not been considered.
Wellingborough is well connected by the A45 and A509 and has substantial residential, industrial and logistics activity around the town. On construction sites, vehicle and plant movement therefore deserves serious attention.
A traffic route that worked during early groundworks may become unsuitable later because materials, hoarding, completed plots or new work areas change sight lines and space. Supervisors should understand the current traffic management arrangements and challenge situations where pedestrians and moving plant are being pushed together.
Ground conditions deserve respect around Wellingborough. North Northamptonshire Council records a local history of iron ore, clay, limestone, sand and gravel extraction, with former quarrying and backfilled areas in parts of the former borough. That does not mean every local construction site has a ground problem. It does mean that supervisors should never make assumptions about excavation stability, previous land use or underground conditions.
Your job is not to become a geotechnical engineer. Your job is to recognise when the excavation, ground support, access, spoil placement, services or surrounding conditions no longer match the safe system that was agreed.
HSE guidance is clear that supervision should reflect the health and safety risk and the skills, knowledge, training and experience of the worker. That means equal supervision is not always appropriate supervision.
A new labourer starting on an unfamiliar site may need close instruction. An experienced operative carrying out familiar work may need less direct oversight. However, even an experienced person may need closer supervision when equipment, risks or the work method are new.
Experience should influence supervision. It should never become an excuse to ignore it. Workers should also know how to obtain help when the supervisor is not standing beside them.
Most supervisors know what safe work looks like when the programme is comfortable. The harder test comes when the job is late, a delivery is waiting, another trade needs the area and somebody says the shortcut will only take five minutes.
Pressure does not cancel the safe system of work. In fact, it is often the moment when active supervision matters most. A supervisor should recognise when the team is starting to trade control for speed and bring the task back to the agreed method before that behaviour becomes normal.
The supervisor does not need to turn every small change into a site shutdown. The skill lies in recognising which changes are harmless and which ones alter the risk enough to need a review. That judgement improves when you know the limits of your own authority and when you are comfortable asking for support.
HSE guidance requires suitable site specific induction and appropriate information, instruction and supervision. For a supervisor, that means communication should match the site and the activity rather than becoming a generic speech that sounds the same everywhere.
A person arriving at a large developing site around Wellingborough may need to understand changing traffic routes, restricted areas, welfare arrangements, emergency procedures and the way different contractors interact. Somebody entering an occupied town centre building may need a different briefing because the public, building users, access and existing services create other problems.
A briefing is successful when the worker knows what to do next and what should make them stop. If the person leaves knowing only that they signed an induction sheet, the communication has not done enough.
Supervisors sometimes see a near miss as paperwork they would rather avoid. That is the wrong way to look at it. A near miss can reveal a failing control before somebody is injured.
Perhaps a telehandler reversed into a route that should have been clear. Maybe an excavation edge deteriorated after rain. Perhaps a material was dropped inside an exclusion area and nobody was hit. The fact that the outcome was harmless does not make the event useless. It gives the team a chance to understand what failed while the cost is still low.
1. What actually happened rather than what was supposed to happen.
2. Which control failed, disappeared or was misunderstood.
3. Was the method unrealistic for the conditions on site.
4. Did another contractor or change in sequence contribute to the event.
5. What needs to change before the same task continues.
6. Who else needs to know because the same problem could exist elsewhere on the project.
SSSTS covers accident and incident causes, near misses, ill health and reporting because the supervisor is often the person closest to the event. Good reporting is not about finding somebody to blame. It is about making sure the same warning is not ignored twice.
The current CITB trainer review requires SSSTS delegates to prepare and deliver a toolbox talk lasting approximately five minutes. The task is not about giving the longest speech. It is about identifying the information that matters and communicating it clearly.
1. Name the task in plain language.
2. Explain the most relevant hazard instead of listing every possible hazard in construction.
3. State the controls workers need to use today.
4. Explain what should make the team stop and ask for help.
5. Ask a question that confirms understanding rather than asking whether everyone understands.
This is a useful habit after the course too. A toolbox talk should give the team something they can use ten minutes later, not something they forget before they reach the work area.
The current CITB examination contains 25 questions and lasts 30 minutes. The maximum score is 30 marks and the pass mark is 80 percent, which means 24 marks.
Delegates may use the SSSTS Workbook during the final 10 minutes of the examination. It must not be used during the first 20 minutes. This arrangement is another reason to understand the course material rather than relying on the workbook as a substitute for learning.
CITB currently permits one examination re sit when the delegate has completed all mandatory course exercises, passed the trainer review and achieved at least 21 marks in the first examination.
A re sit can be offered on the same day if the delegate agrees and has adequate preparation time. If more time is needed, CITB rules allow a later re sit within the permitted period. A score below 21 on the initial examination does not qualify for the re sit route and the full course has to be attended again.
If the re sit is also unsuccessful, the full course must be completed again. The sensible approach is therefore to participate fully from the first session rather than trying to rescue the course at the examination stage.
SSSTS is valuable, but it has limits. Understanding those limits is part of professional supervision.
CITB itself states that attendance does not confer competence as a site supervisor. Competence comes from a combination of education, training and experience and should be judged by an appropriate senior person.
CPTS is based at Airfield Road, Wellingborough, NN29 7XA. For local learners, classroom training can make sense because you can attend the training base without treating the course as a long distance trip.
CITB also permits remote online delivery. A live remote SSSTS course remains structured trainer led learning with attendance, participation and assessment requirements. It is not a self paced recording that you can leave running in the background while you work.
Classroom learning often suits delegates who prefer direct discussion and want to separate training from the distractions of the working day. Remote delivery can work well when travel or work patterns make attendance at the training centre difficult.
Need SSSTS for yourself or several supervisors. Contact CPTS in Wellingborough to discuss dates, group requirements and the most suitable delivery format.
The Wellingborough location is also practical for learners travelling from nearby parts of North Northamptonshire. Depending on your route, delegates may come from Irthlingborough, Rushden, Higham Ferrers, Finedon, Wollaston, Earls Barton, Raunds and surrounding villages.
Always confirm the selected course date and joining instructions before travelling. Training format, timetable and availability can change, and a course advertised by the company is not a reason to arrive at the training centre without a confirmed booking.
SSSTS concentrates on supervision. SMSTS is aimed at broader construction site management responsibilities. There is naturally some overlap because supervisors and managers work inside the same health and safety system, but they do not have the same scope of responsibility.
If you spend most of your day organising a team, communicating RAMS, monitoring work and escalating issues to management, SSSTS is normally closer to that role. If you are moving towards wider responsibility for site planning, management systems and coordination across the project, SMSTS may be the more appropriate next step.
The CITB Site Safety Plus SSSTS certificate is valid for five years. CITB identifies the one day SSSTS Refresher as the route for delegates who have previously completed SSSTS and still hold an in date certificate.
Do not wait until the certificate has already expired. Plan the refresher while the existing certificate is still valid so you do not create an avoidable gap in your training record.
Zobacz szkolenie odświeżające SSSTS
1. Check that your current or planned job actually involves supervisory responsibility.
2. Make sure your English is strong enough to participate in group exercises, discussions and the toolbox talk assessment.
3. Confirm the course date, delivery format and joining instructions.
4. Think about real examples from your work involving RAMS, changing conditions, plant, access or workforce communication.
5. If your employer is paying, confirm what evidence or training records they need after the course.
6. If your SSSTS is a renewal issue rather than a first course, check whether your current certificate is still in date before booking the refresher.
7. Do not book a higher level course simply because it sounds better. Match the training to the responsibility you actually carry.
SSSTS is designed for people who currently hold, or are preparing to take on, a supervisory role in construction. This commonly includes site supervisors, foremen, gangers, team leaders and experienced tradespeople moving into supervision.
Obecny kurs CITB SSSTS trwa dwa dni. Uczestnicy muszą być obecni przez całe 15 godzin, nie licząc przerw, aby uzyskać certyfikat.
Yes. CITB permits SSSTS to be delivered face to face in a classroom or remotely online. Remote delivery remains live trainer led learning with participation and assessment requirements.
Under the current CITB rules, the maximum is 20 delegates for classroom delivery and 12 for remote delivery.
You must complete all mandatory exercises, pass the trainer review and pass the end of course examination.
Yes. The current trainer review requires SSSTS delegates to prepare and deliver a toolbox talk lasting approximately five minutes.
The current examination contains 25 questions. It lasts 30 minutes and has a maximum score of 30 marks.
The pass mark is 80 percent, which is 24 marks out of 30.
Yes, but only during the final 10 minutes of the examination. The workbook cannot be used during the first 20 minutes.
One re sit may be available if you completed the mandatory exercises, passed the trainer review and achieved at least 21 marks in the first examination. A score below 21 means the full course has to be taken again.
No. CITB states that attendance does not itself confer competence. Competence develops through a combination of education, training and experience and should be judged by an appropriate senior person.
Certyfikat CITB Site Safety Plus SSSTS jest ważny przez pięć lat.
An in date SSSTS certificate can be renewed through the one day SSSTS Refresher route. Plan the refresher before the current certificate expires.
No. SSSTS is aimed at site supervision, while SMSTS is intended for broader site management responsibilities.
Construction and Plant Training Services LTD lists its company and training address as Airfield Road, Wellingborough, NN29 7XA, UK. Always confirm your course booking and joining instructions before travelling.
No. SSSTS and CSCS have different purposes. Completing SSSTS does not automatically issue or replace a CSCS card.
Dziękujemy za wiadomość i odpowiemy tak szybko, jak to możliwe.